Sediment Backwash 7500 Filter Systems
Rusty water? Sediment, Turbidity or Particles in Your Well Water?
The 7500-Rev4 sediment backwash filter series are heavy-duty, self-cleaning,
sediment removal systems for well water.
With the ability to filter down to the 3 to 5 micron range, these systems are excellent choices for removing fine particles,
dirt, and rust; and, unlike filter-cartridge systems, these systems will not restrict flow or pressure.
Uses a ceramic disc for dramatically longer life over typical piston/seal systems and virtually maintenance free.
Choosing Your System
Sediment Auto Backwash Filter Systems for Well Water
Clean Sediment-Free Water Throughout the Home With NO Filters To Change
Choosing your Model
|
Model*
|
Service Flow Rate
|
Backwash Flow Rate
|
# of Bathrooms (as a guide only)
|
Approximate # of Persons in Home
|
Width / Height
|
|
0.5 CF
|
6 GPM
|
4 GPM
|
1
|
1 - 3
|
6" x 42"
|
|
0.75 CF
|
8 GPM
|
5 GPM
|
1
|
1 - 4
|
8" x 51"
|
| 0.75 CF Short | 8 GPM | 5 GPM | 1 | 1 - 4 | 10" x 37" |
|
1.0 CF
|
10 GPM
|
7 GPM
|
1 - 2.5
|
1 - 4
|
9" x 55"
|
|
1.5 CF
|
12 GPM
|
8 GPM
|
1 - 3
|
1 - 6
|
10" x 61"
|
|
2.0 CF
|
14 GPM
|
12 GPM
|
2 - 5
|
1- 6
|
12" x 59"
|
|
2.5 CF
|
16 GPM
|
14 GPM
|
2 - 5
|
1 - 8
|
13" x 61"
|
Note: The 0.75 CF, 1.0 CF, and 1.5 CF models work best for most homes with 1 - 3 bathrooms and are our most popular models.
"Backwash Flow Rate" is the minimum flow rate in gallons per minute ("GPM") that is recommended for that size filter to operate properly. If your well pump can pump 12 gallons per minute, for example, you could use the 2.0 CF model if you chose to, and it would work properly.
Maximum line pressure recommended 100 PSI. Maximum water temperature recommended: 100 F.
*"CF" refers to the amount of filter media included in cubic feet. A 1.5 CF has 1.5 cubic feet of filter media inside it, for example.
Benefits
Our systems provide many benefits over typical filter cartridge systems. In particular, our systems provide:
- Better filtration than sand or anthracite filters
- Longer life and higher flow rates
- Enhanced water quality through filtration down to 5 microns
- High-purity natural zeolite 14 x 40-inch mesh
- High-tech Ceramic Disc Valve: The moving parts of the 7500 series control valve feature super hard ceramic and graphite meshing surfaces for exacting tolerances, eliminating the need for O-rings or gaskets.
- Easily programmable, multiple sequence set-up features, regeneration modes and interlocking capabilities.
- Backwashes are based on time (days of the week).
- More efficient backwashes that use less water and require backwashing less frequently
- Very long-lasting. Ceramic disc valves last years longer than standard piston-type control valves and backwash over 150,000 cycles.
- Corrosion Proof: Resistant to sand, caustics, and acids.
- Automatic recall after power outages and maximum day regeneration functions
- Resists Abrasion: Patented ceramic discs are corrosion and abrasion-resistant for superior durability and longevity.
- Exceptional High Flow Rate with noticeable noise reduction during regeneration.
- NSF-certified, one-piece, seamless poly filter tank for long life
- Voltage 110v-230V Power Adapter. Control valve 12VDC. Uses less than 20 watts of power.
Includes
- Turbidex Sediment NSF-certified filter media
- Heavy-Duty NSF 7500-Rev ceramic disk control valve
- Bypass valve with 1" pipe connectors
- NSF-certified filter tank
Typical Well Installation
