Manual Backwash Well Water Iron Filter with Pro-OX Eliminates Iron, Manganese and Sediment

• No power required, manual backwash control valve uses well water water pressure to backwash and rinse filter.
• Pro-OX Filters are the longest lasting and most powerful system for removing iron, rust and sediment from well water.
• Pro-OX filter media last for many years longer than other filter media.
• Contains a unique blend of high-purity manganese dioxide (Pro-OX) and naturally mined Zeolite for filtration down to 3 microns for maximum filtration and iron removal.
• Pro-OX Filters include: Pro-OX Manganese Dioxide Certified filter media; Zeolite Turbidity Filter media, filter gravel, filter tank; heavy-duty CWS Manual Valve.
• Backwash Flow Rate and Quantity: Needs 4 gpm to backwash. 0.5 cf size uses 64 gallons of backwash water 1 to 3 times a week depending on water quality and use.
• Backwash water safe for septic tanks.
• Pro-OX Manganese Dioxide is an Certified natural high purity mineral that is used for removing iron, hydrogen sulfide, and manganese from water supplies.
• Removes up to 5 PPM iron and 0.5 PPM manganese depending on water chemistry.
• For best/ higher removal rates chlorine injection, peroxide, or air injection may be required before the iron filter.
• Iron bacteria, hydrogen sulfide and some tannins can also be removed with pre-chlorination.
• Pro-OX media utilizes an oxidation-reduction reaction and filtration process similar to Greensand, but at a much higher level of performance.
• This unique iron filter media works much better than other solid manganese dioxide iron-filter media due to its higher purity and porosity.
• Pro-OX Manganese Dioxide contains greater than 80% manganese dioxide in an extremely unique cluster format for enhanced performance and maximized capacity.
• Pro-OX Manganese Dioxide generally works better than Greensand or Birm, due to its high purity, superior oxidation/filtration ability.
• Unlike coated iron filter media such as Greensand or BIRM or MTM, Pro-OX lasts for many years and doesn't have a coating to wear off or deteriorate like other iron filter media.
• Filter tank is certified one piece seamless polyester construction for long life.
• Max pressure recommended is 100 psi. 30 psi minimum.
• Maximum water temperature recommended 100F.

Includes

• Pro-OX certified iron filter media
• Heavy-Duty Manual control valve
• Certified filter tank with distributor tube

Warranty:

Sizing Guide

Model	Number of Bathrooms in Home	Flow Rate	Backwash Flow Rate	Iron / Manganese Removal	Dimensions
0.5	1	4 GPM	4 GPM	5PPM/ 0.5 PPM	Diameter: 6" Height: 43.5"
0.75 CF	1 - 2	7 GPM	5 GPM	5 PPM / .5 PPM	Diameter: 8" Height: 52.5"
1.0 CF	1 - 2	8 GPM	7 GPM	5 PPM / .5 PPM	Diameter: 9" Height: 56.5"
1.5 CF	1 - 2	10 GPM	10 GPM	5 PPM / .5 PPM	Diameter: 10" Height: 62.5"
2.0 CF	2 - 4	12 GPM	12 GPM	5 PPM / .5 PPM	Diameter: 12" Height: 60.5"

Flow Rate: Refers to maximum recommended Gallons Per Minute ("GPM") which means how fast the water is flowing.

The 1.5 CF model works best for most homes (such as 2 -3 bathroom homes with 2 - 6 persons).

"CF" refers to the amount of filter media blend in cubic feet.

A 1.5 CF has 1.5 cubic feet of Pro-OX iron filter media (Pro-OX, Turbidex and filter gravel).

Heavy-Duty manual backwash control valve 1" In-Out-Drain port adaptors

Certified filter tank

Distribution Tube and bottom basket, top basket

Installation manual and instructions, technical support by phone if you have any questions.

Included

• Iron filter media blend (Pro-OX, Chemsorb, base filter gravel)
• Heavy-Duty manual backwash control valve 1" In-Out-Drain
• certified filter tank
• Installation manual and instructions, technical support via email/ phone if you have any questions.