Pro-OX Iron Filter 5900-BT 1.5 CF 1054
Overview
- Description
- Specs
- Warranty
- Info
- Documents
Pro-OX Iron Filters for Well Water Eliminate Iron, Manganese and Sediment
Pro-OX 5900-BT Iron Filters are the longest lasting and most powerful system for removing iron, rust & sediment from well water
Includes
Sizing Guide
Model | Number of Bathrooms in Home | Flow Rate | Backwash Flow Rate | Dimensions |
0.75 CF | 1 - 2 | 8 GPM | 5 GPM | Diameter: 8" Height: 51.5" |
1.0 CF | 1 - 2 | 10 GPM | 7 GPM | Diameter: 9" Height: 55.5" |
1.5 CF | 1 - 2 | 12 GPM | 10 GPM | Diameter: 10" Height: 61.5" |
2.0 CF | 2 - 3 | 14 GPM | 12 GPM | Diameter: 12" Height: 59.5" |
1.0 CF (Short) | 1 - 2 | 10 GPM | 8 GPM | Diameter: 13" Height: 38" |
Flow Rate: Refers to maximum recommended Gallons Per Minute ("GPM") which means how fast the water is flowing. The 1.5 CF model works best for most homes (such as 2 -3 bathroom homes with 2 - 6 persons). However for homes with 2 - 4 persons, the 0.75 or 1.0 CF models work great. Higher flow rates are possible through these systems, this is just meant as a guide or suggested use.
"CF" refers to the amount of filter media blend in cubic feet. A 1.5 CF has 1.5 cubic feet of Pro-OX iron filter media (Pro-OX, Zeolite and filter gravel).
Have Questions? Call 888-600-5426 and speak to one of our certified water treatment technicians for technical help or if you have questions about sizing or flow rates.
Removal Rate: Removes up to 5 PPM iron, .5 PPM manganese, much higher removal rates possible with pre-chlorination or pre-aeration.
Iron levels over 5 PPM, or when manganese or other conditions such low pH, high levels of sulfur odor or iron bacteria or tannins, please note that additional treatment such as chlorine, peroxide, or aeration may be needed.
Manganese removal: when manganese is present, we recommend a chlorine feed. A chlorine feed with a contact/retention tank allowing 30 seconds of time after the chlorine has been injected, followed by the Pro-OX filter systems does a GREAT job on removing manganese. A carbon filter can be used after the Pro-OX system to remove any residual chlorine, so you get all the benefits of chlorination without having any chlorine in the house water.
Hydrogen Sulfide Rotten Egg: if hydrogen sulfide is present and the water also contains iron, we recommend an Air-Charger Pro-OX system. If the hydrogen sulfide levels are over 5 PPM, we recommend a chlorine feed, and/or aeration prior to the Pro-OX system. Please contact us for more information if you need assistance.