Pro-OX Iron Filter 7500-REV2.5 0.75 CF 10x30 Short Height

Pro-OX Iron Filter 7500-REV2.5 0.75 CF 10x30 Short Height
Processing...
Code: FE013680
Quantity Price
1 $1,049.00
2+ $734.30
DEAL $1,049.00 $2,495.00 List Price

In Stock!

Read Full Description

  • Description
  • Specs
  • Warranty
  • Info
  • Documents

Pro-OX 7500-Rev2.5 Advanced Iron Filter Systems Remove Iron and Manganese from Well Water

  • Pro-OX 7500-Rev2.5 iron filters are a robust system for removing iron, rust, and sediment from well water
  • Corrosion Proof Ceramic disc auto backwash valve lasts years longer than standard piston-type control valves and can backwash over 150,000 cycles
  • It uses advanced high-purity Pro-OX iron filter media, which lasts many years longer than traditional greensand or other iron filter media.
  • Easily removes up to 5 PPM iron and 0.2 PPM manganese
  • For higher levels we recommend ozone, chlorine or peroxide injection ahead of iron filter.
  • Backwashes are based on the time (days of the week) or gallons used. More efficient backwashes that use less water.
  • Automatic program recall after power outages and maximum day regeneration functions
  • Exceptional High Flow Rate with noticeable noise reduction during regeneration.
  • NSF-certified, one-piece, seamless poly filter tank for long life
  • Voltage 110v-230V Power Adapter. Control valve 12VDC. Uses less than 20 watts of power












    • Frequently Asked Questions:

    Why would I need the optional Rusco spindown prefilter?

    The spindown filter will remove any sand or grit that may be in your well water and protect the iron filter. Even though it is not affected by sand like other piston and seal type control valves, it is good to keep sand out of your Pro-OX iron filter.

    Another advantage is that it can be used to sanitize your Pro-OX iron filter with chlorine bleach if you have iron bacteria.  By adding a cup of bleach once a year to the spindown filter, and turning the water back on, the Pro-OX media can be cleaned and sanitized. It only takes a few minutes and no chlorine gets in the house, as the filter is then put into backwash after sanitizing.

    Can I use the optional air charger kit?

    This size does not have that option, tank is needs to be 44" in height minimum.

    Why use the optional ozone generator?

    The optional ozone upgrade allows ozone gas to be injected in the air cycle rather than just air.  This helps reduce iron and sulfur bacteria and provides much higher levels of oxidation to rapidly eliminate sulfur odors and help the Pro-OX filter media remove higher levels of iron and manganese.  The powerful ozone generator includes a built-in air dryer for long life and produces 1 gram of higher purity ozone per hour, which is much higher than most ozone systems of this type.

    Can I install this system myself or do I need a plumber?

    Most of our customers do install themselves, however it is easy for any plumber or handyman to install. Ordering the optional flex lines makes it very easy to hook up to your piping.

    What maintenance is required?

    If you use the optional air charger kit, the air injector will need to be cleaned once or twice a year.  This takes about 10 minutes and requires no special tools. There is no other maintenance required.

    What if I don't use the air charger option, what maintenance is required?

    There is little or no maintenance required.  If your water has iron bacteria you can add some chlorine bleach in the optional spindown filter and turn the water back on and clean the Pro-OX media with chlorine, once or twice a year. This will remove any iron bacteria film and restore the Pro-OX media.  Many customers however go years with no maintenance.   Eventually after 6 to 10 years the Pro-OX filter media can be dumped out and replaced, however we have many customers using it for over 12 years so far and it still works fine.

    Will this affect my water pressure?

    No. The pressure drop at maximum flow rate is around 10 PSI.  At regular flow rates such as used in the home, the pressure drop is 1 or 2 PSI and is not noticeable.

    What does Backwash Flow Rate Mean?

    Your well produces a maximum amount of gpm. Many wells are less than 10 gpm, and you size the filter to match your available flow rate.

    Flow Rate Calculator If you have a submersible pump with a pressure tank and switch, use this link to find your available flow rate.

    I have questions, can I get help when ordering or when installing it?

    Yes, we welcome your questions!  We have a team of experienced water treatment specialists with many years of experience standing by Monday - Friday. 

    Please call us or email us at [email protected]

    Sizing Guide:

    ModelNumber of Bathrooms in HomeFlow RateBackwash Flow RateDimensions
    0.5 CF1 6 GPM4 GPMDiameter: 6"  Height: 42.5"
    0.75 CF1 - 27 GPM6 GPMDiameter 10" Height 37.5" (short height)
    0.75 CF1 - 28 GPM6 GPMDiameter: 8" Height: 52.5"
    1.0 CF2 - 310 GPM7 GPMDiameter: 9" Height: 56.5"
    1.5 CF3 - 412 GPM10 GPMDiameter: 10" Height: 62.5"

    Flow Rate: Refers to maximum recommended Gallons Per Minute ("GPM") which means how fast the water is flowing. The 0.5 CF model works best for very small homes (one bath, 1-2 people) or for vacation home part-time use.  

    Backwash Flow Rate: This refers to the amount of water needed to lift, clean, and reclassify the Pro-Ox media.  Your well must put out the minimum gpm requirment for the backwash.

    "CF" refers to the amount of filter media and gravel are in the tank, a total of 0.5 cubic feet.

    Have Questions? Call 888-600-5426 and speak to one of our certified water treatment technicians for technical help or if you have questions about sizing or flow rates.

    Removal Rate: Easily removes up to 5 PPM iron, .2 PPM manganese,  higher removal rates possible with pre-chlorination or pre-aeration; there is no air draw otpion for this size tank.

    Iron levels over 5 PPM, or when manganese or other conditions such low pH, high levels of sulfur odor or iron bacteria or tannins, please note that additional treatment such as chlorine, peroxide, or aeration may be needed.

    Manganese removal: when manganese is present over 0.5 PPM, we recommend a chlorine feed. A chlorine feed with a contact/retention tank allowing 30 seconds of time after the chlorine has been injected, followed by the Pro-OX filter systems does a GREAT job on removing manganese. A carbon filter can be used after the Pro-OX system to remove any residual chlorine, so you get all the benefits of chlorination without having any chlorine in the house water.
     

    Warranty:

  • 10 year Warranty on the filter tanks. All tanks and valves are NSF Certified & top quality.
  • 5 Year Warranty on the control valve.
  • See our Return Policy Here

    Includes:

  • Pro-OX certified iron filter media, bottom gravel.  
  • Heavy-Duty 7500-Rev2.5 ceramic disc control valve
  • NSF-certified filter tank, 
  • Distributor tube and bottom basket
  • Bypass valve with 1" pipe connectors

    • Advanced Features:

  • Ceramic disk control valve requires no maintenance unlike traditional piston and seal type Clack or Fleck valves
  • Backwashes based on gallons used and/or days of the week
  • 4 languages on the display if needed besides default English setting
  • Easy to use full port bypass valve won't cut back on flow and pressure
  • Keeps track of time and settings even in a power failure with built-in battery included

    • Guaranteed to Work or Money Back:

  • 90 DAY NO-HASSLE RETURN GUARANTEE.
  • Try it, and if you are not 100% satisfied, return for your money back, less shipping costs.
  • 10 year Warranty on the filter tanks. All tanks are Certified & top quality.
  • 5 Year Warranty on the control valve.
  • Lifetime Warranty on Ceramic Disc internal moving parts!

    • Manufacturer: CWS

    Manufacturer #: FE013680

    Download Installation Guide

    Reviews