Whole House Nitrate Filter System Removes Nitrate and Sulfate from Well Water

• These automatic nitrate removal systems reduce nitrate levels by up to 90% when properly sized and maintained
• Regenerate with common water softening salt. No toxic chemicals necessary.
• Reliable 5900-BT Meter on-demand control valve automatically backwashes and cleans the nitrate filter based on the amount of water you use, saving salt and water
• The 5900-BT control valve is made from non-corrosive UV-resistant Noryl has a simple mechanical design that is easy to understand and program
• High Capacity NSF certified nitrate removal resin filter media included.
• Fully adjustable backwash and rinse cycles to save water and allow maximized performance
• Time-tested, hydraulically balanced backwash piston seal and spacers. Easy to change and service.
• 5900-BT heavy duty Blue Tooth enabled backwash control valve features fully adjustable backwash and rinse cycles, saving water and allowing maximized performance.
• Monitor flow rates, history of water usage and settings from your smart phone if desired.
• Voltage 110v-230V Power Adapter. Control valve 12VDC. Uses less than 20 watts of power.
• Weather & Insect Control Valve Cover Included.
• Non-corrosive high-tech material construction
• Filter tank is NSF certified one piece seamless polyester construction for long life.
• User friendly LCD display, showing time of day, regeneration mode, and gallons remaining before next regeneration backwash cycle.
• Legacy View Bluetooth enabled 5900-BT Electronic Control Valve for advanced water usage & flow monitoring from your smart phone!
• Time-tested hydraulically balanced piston seal and spacers provide years of service
• Sizing is important and a complete general mineral water analysis is recommended
• Sulfates affect performance and it is important to know the sulfate levels in addition to the nitrate levels
• For assistance in sizing or selecting a nitrate system please email us with water chemistry information to support@cleanwaterstore.com

Warranty:

Sizing Guide

Technical Specifications

• Sizing is important and a complete general mineral water analysis is recommended prior to selecting your nitrate system
• Sulfates affect performance and it is important to know the sulfate levels in addition to the nitrate levels.
• Max pressure recommended is 100 psi
• Maximum water temperature recommended 100F
• 100V - 240V 50/60hz power. Plugs into any standard outlet, actual control valve is 12VDC. Uses less than 20 watts of power.
• Actual nitrate removal capacity depends on the total amount of nitrate and sulfates present in the water
• For assistance in sizing or selecting a nitrate system please email us with water chemistry information to support@cleanwaterstore.com