Greensand Iron Filter 9510 4.0 CF
Overview
Heavy Duty Commercial Iron Filter System
Removal Rate: Removes up to 10 PPM iron, 5 PPM manganese, 10 PPM hydrogen sulfide (optional chlorine or peroxide feed can be used to enhance removal rates).
Iron levels over 5 PPM, or when manganese or other conditions such low pH, high levels of sulfur odor or iron bacteria or tannins, please note that additional treatment such as chlorine, peroxide, or aeration may be needed.
Manganese removal: when manganese is present, we recommend a chlorine feed. A chlorine feed with a contact/retention tank allowing 30 seconds of time after the chlorine has been injected, followed by the Pro-OX filter systems does a GREAT job on removing manganese. A carbon filter can be used after the Pro-OX system to remove any residual chlorine.
Hydrogen Sulfide Rotten Egg: if hydrogen sulfide is present and the water also contains iron, we recommend an Air-Charger Pro-OX system. If the hydrogen sulfide levels are over 5 PPM, we recommend a chlorine feed, and/or aeration prior to the Pro-OX system. Please contact us for more information if you need assistance.
- Description
- Specs
- Warranty
- Documents
High Flow Commercial Greensand Filter Remove Iron, Manganese
Works with Chlorine Feed. No Potassium Permanganate Needed.
Powerful iron filtration removes iron, manganese, and hydrogen sulfide.
This type of greensand filter does not use potassium permanganate but does require the water be chlorinated ahead of the iron filter.
A simple chlorine feed pump ahead of the greensand filter allows superior performance of iron and manganese removal (sold separately)
Oxidizes and removes up to 30 PPM iron, 5.0 PPM manganese, and sulfur odors with chlorine feed and optional contact tank.
High quality certified Greensand Plus filter media
certified, one-piece, seamless polyester filter tank for long life
Heavy-Duty 9510 certified backwash control valve is completely waterproof
High Flow Rates for large residential and commercial applications
Features:
Operating pressure: 20 - 125 psi
Filter Tank: Corrosion resistant fibreglass reinforced polyethylene 44 Certified
High Flow Rates: Feature 95 High Flow control valve backed by a full 5 year warranty.
Large Display: Fully programmable and easy to set electronic controller.
Tough Corrosion Resistant Pressure Vessels: approved filament wound mineral tanks with rugged polyethylene liners backed by a 5 year warranty.
Inlet / Outlet Service Connections 1 inch thru 1.5 inch.
High Flow Distribution: Durable, non-corrosive ABS fine slotted hub and lateral distribution provides trouble-free operation.
Advanced Diagnostic Information: Easily trouble shoot and access system information displayed in real time.
Includes:
certified, one-piece, seamless polyester filter tank for long life
Heavy-Duty 9510 certified backwash control valve is completely waterproof
Sizing Guide
Model
Peak Flow Rate
Backwash Flow Rate
Pipe Size
Dimensions
2.5 CF
14 GPM
10 GPM
11" or 1.5"
13" X 68"
3.0 CF
16 GPM
12 GPM
1.5"
14" X 80"
4.0 CF
18 GPM
15 GPM
1.5"
16" X 80"
5.0 CF
20 GPM
20 GPM
1.5"
18" X 80"
7.0 CF
22 GPM
25 GPM
1.5"
21" x 80"
| Model | Peak Flow Rate | Backwash Flow Rate | Pipe Size | Dimensions |
| 2.5 CF |
14 GPM |
10 GPM |
11" or 1.5" |
13" X 68" |
| 3.0 CF |
16 GPM |
12 GPM |
1.5" |
14" X 80" |
| 4.0 CF |
18 GPM |
15 GPM |
1.5" |
16" X 80" |
| 5.0 CF | 20 GPM | 20 GPM | 1.5" |
18" X 80" |
| 7.0 CF | 22 GPM | 25 GPM | 1.5" | 21" x 80" |
