- Description
- Specs
- Info
- Documents
Power supply 100v-240V 50/60 hz with cord for 5900e, 5900s, 5900-BT control valves (CSI Sig I, Sig II and Sig III valves).
Plugs into standard 110v style two-pronged outlet.
Actual control valve voltage and output of power supply is 12VDC.
.
HOW TO TELL IF THE POWER SUPPLY IS DEAD:
- Disconnect the 9-volt battery
- Unplug the power supply from both wall and control valve port
- After 30 seconds, plug the power supply into the wall, and then into the valve
- If the power suppy is bad, it will briefly show the revision code (C4.09, for example) on the screen, and then go dark
- When the power supply is good, it will show the revision code, and then change between the clock time and days or gallons until backwash/ regen
- If you plug in either the power supply or the 9-volt battery and there is not even a brief digital display, then the circuit board may be bad
Manufacturer: Chandler
Manufacturer #: 20001X125
