Pipe Size In-Out-Drain on all models is 2" NPT.

Pressure loss is 1 PSI per 5 GPM.

"Backwash Flow Rate" is the minimum flow rate in gallons per minute ("GPM") that is recommended for that size filter to operate properly.

Maximum line pressure recommended 100 PSI. Maximum water temperature recommended: 100 F.

*"CF" refers to the amount of filter media included in cubic feet.

Higher Flow Rates Possible (depending on contaminants being removed)

Benefits

Our systems provide many benefits over typical sand filter or cartridge systems:

• Better filtration than sand or anthracite filters.
• High-tech Ceramic Disc Valve: the moving parts of the 7500 series control valve feature super hard ceramic and graphite meshing surfaces for exacting tolerances, eliminating the need for O-rings or gaskets.
• All wetted parts of the control valve, tank, and media are NSF certified.
• Easily programmable, multiple sequence set-up features, regeneration modes, and interlocking capabilities.
• Easy-to-read LCD display for quick installation and convenient maintenance
• More efficient backwashes that use less water and require backwashing less frequently
• No hard water bypass during the regeneration backwash sequence for cleaner water
• Very long-lasting. Ceramic disc valve last years longer than standard piston-type control valves and backwash over 150,000 cycles.
• Corrosion Proof: Resistant to sand, caustics, and acids.
• Automatic recall after power outages and maximum day regeneration functions
• Resists Abrasion: Patented ceramic discs are corrosion and abrasion resistant for superior durability and longevity.
• Exceptional High Flow Rate with noticeable noise reduction during regeneration.
• Enhanced water quality through filtration down to 5 microns
• One-piece seamless polyester construction for longer life
• Fully adjustable backwash and rinse cycles, saving water and maximizing performance
• Turbidex NSF Certified High purity natural zeolite filters down to the 3 to 5-micron range
• Quiet.The quietest backwash control valve on the market
• NSF Certified filter tank and media. Control valve manufactured with FDA-approved materials.

Includes

• 7500-C 2" control valve 100-240v 50/60hz
• The required amount of Turbidex filter media and under-bedding filter gravel.

Overview

• All sediment backwash systems include filter media, tank, backwash control valve
• Easy to service: little or no maintenance.
• Proven technology used over decades.
• No chemicals or salt required.
• Timed backwashes based on hours or day of the week.
• Turbidex filter media is a high purity, low sodium, natural, zeolite mineral.
• Certified: ANSI/NSF Standard 61 listing.
• Mesh size: (14 x 40 mesh)
• Has surface micro-mineral projections with 0.25 to 10 micron spacing
• Timed backwashes based on hours or day of the week.
• The material is mined,crushed, dried, and double-screened
• Timed backwashes based on hours or day of the week.