Hi,
Here are pictures of my new Pro-Ox 7000 SXT iron filter system.
Compared to the old potassium permanganate system with its bucket full of black “ink” and
it's myriad of pipes running everywhere – not to mention it only takes a 2-hour recharge every 4 or 5 days – this new system is great!
It was easy and fun to install.
I checked the iron ppm both before and after the iron filter using an electronic tester
and it reduced from 3.9 ppm to 0.14 ppm.
It only needs to backwash/rinse every 1000 gallons and does this based on water consumption.
In my case, since I live alone it's about every 2 weeks!
Also, the backwash and rinse cycles are only about 8 minutes each!
I fully recommend this iron filter system.
Art Wild
Washington, Illinois
Download the Pro–OX 7000-SXT Iron Filter Installation &. Start-Up Guide here.
Wildfire Water Contamination: What You Need to Know After the Fires Wildfires not only devastate…
Using clean water for pickles is not just a best practice—it’s crucial for achieving great…
If you rely on a well for your home’s water supply, you might have encountered…
Effects of Chlorine and Hard Water on Skin: Top Skin Problems and Solutions Have you…
When creating a safe and healthy environment at home, clean water is essential—especially for moms…
This brief article gives information about several common contaminants found in private wells. It should…
