A common question we often get is how to install an auto-backwash carbon filter and a water softener. Carbon filters remove chlorine, tastes, odors and sediment and are self cleaning. Carbon backwash filters installed in front of water softeners or no-salt water conditioners make a great combination.
The carbon filter is installed prior to the water softener. This extends the life of the softener by removing chlorine prior to the softener and makes for great clean water through out the home.
7000-SXT systems come with bypasses, so you can bypass each system individually as needed. You can simply connect the output of the carbon filter to the input of the softener, either by using a short length of PVC, a stainless steel flex line, PEX piping.
Also see these installation guides for more information:
Carbon Backwash Filter Installation Guide 7000
Water Softener 7000 Installation Guide
If you rely on a well for your home’s water supply, you might have encountered…
Effects of Chlorine and Hard Water on Skin: Top Skin Problems and Solutions Have you…
When creating a safe and healthy environment at home, clean water is essential—especially for moms…
This brief article gives information about several common contaminants found in private wells. It should…
Which are the U.S. Cities with the Hardest Water? Hard water is a common issue…
Many people are unaware that water quality can significantly affect hair and skin health. Whole…
