Arsenic Whole House Filter Systems 7500
- Remove up to 99% of total Arsenic in water!
- Whole house or cartridge media.
- Also reduces lead, chromium, cadmium, molybdenum, and antimony.
- Contact our support team before purchasing to estimate filter media life span.
Sizing Guide
Model | Number of Bathrooms in Home | Max Flow Rate* | Backwash Flow Rate | Dimensions |
0.75 CF | 1 | 3.5 GPM | 2.5 GPM | Diameter: 10" Height: 36" |
1.0 CF | 1 | 4.0 GPM | 2.5 GPM | Diameter: 9" Height: 55" |
1.5 CF | 1 | 5.0 GPM | 3.0 GPM | Diameter: 10" Height 62" |
2.0 CF | 2 - 3 | 8.0 GPM | 4.0 GPM | Diameter: 12" Height: 60" |
3.0 CF | 2 - 4 | 10.0 GPM | 5.0 GPM | Diameter: 14" Height: 72" |
4.0 CF | 2 - 6 | 14.0 GPM | 7.0 GPM | Diameter: 16" Height: 72" |
Remove Arsenic, Lead and other Heavy Metals from Your Well Water
- Featuring patented NSF Std. 61 validated Titanium Dioxide Adsorbent Media for the efficient reduction of both Arsenic III & V
- Non-hazardous disposal of media as solid waste - media passes EPA TCLP (Toxicity Characteristic Leach Procedure)
- Higher adsorbent capacity than GFO (Granular Ferric Oxide) & GFH (Granular Ferric Hydroxide) for longer media lifespan.
- NSF certified filter tank with one-piece seamless polyester construction for long life
- Heavy-duty backwash control valve features fully adjustable backwash and rinse cycles, saving water and allowing maximized performance.
- Non-corrosive high-tech material construction
- User-friendly LCD display, showing the time of day, regeneration mode, and gallons remaining
- Very long-lasting control valve: Ceramic disc valve lasts years longer than standard piston-type control valves and backwash over 150,000 cycles.
- Precise Monitoring of water usage allows you to change out arsenic media after a predetermined number of gallons has passed through the system!
- Low backwash flow rate, uses very little wastewater compared to other systems. Backwashes only once every 30 days.
- Recommended pretreatment: Pre-Filter with 5/50 dual-grade micron filter to eliminate any fine sediment in water before Arsenic System.
- If iron or manganese is present, reduce iron to less than 0.3 PPM and reduce manganese to less than 0.04 PPM with a Pro-OX Iron Filter System.
- * This is the maximum flow rate recommended. Lower flow rates may be recommended depending on water chemistry.
Frequent routine arsenic testing before and after system is recommended. Warranty extends to equipment only and no warranty or guarantees are extended to cover health or drinking water quality. Before purchasing or installing this system consult with one of our Certified Water Specialists for more information and expected media life.
How Long Will the Arsenic Filter Media Last on My Well Water? The role of pH is very important, see this chart for how long media lasts based on the pH of your water.